adminCCNA 200-301 Dumps are Cisco Certified Network Associate exam material for entry-level candidates. Lead4Pass 200-301 dumps prepare candidates for Cisco Certified Network Associate exam questions and answers including the latest 2022 mock labs, https://www.leads4pass.com/200-301.html helping you earn your Cisco Certified Network Associate certification.
Cisco technology is spread all over the world. This means that CCNA certified professionals will continue to be sought after, as long as you ensure that you can successfully achieve the CCNA 200-301 certification. Use the CCNA 200-301 dumps to guarantee your success with the Cisco Certified Network Associate certification.
Ccna FAQs: About, Value, Exam Material & labs
About 200-301 CCNA: What You Need to Know
Vendor: Cisco
Exam Code: 200-301
Exam Name: Cisco Certified Network Associate
Certification: CCNA
Languages: English and Japanese
Price: $300 USD
Duration: 120 mins
Number of Questions: 100-120 questions
Passing score: 82%
200-301 dumps: https://www.leads4pass.com/200-301.html (CCNA exam dump maps to Cisco 200-301 CCNA exam objectives) Include 2022 Newest Simulation Labs
200-301 dumps (Number of Questions): 824 Q&A
Last update time: Jun 26, 2022
Is CCNA worth it?
Yes, the CCNA is definitely worth it — it’s one of the best certifications a network administrator could earn at any point in their career.
The CCNA is worth it because Cisco technology provides service provider and enterprise router solutions to nearly 40% of the world.
Of course, there are plenty of non-Cisco networks, but there’s basically no other certification that can all at once prepare you for all the devices and jobs that the CCNA does.
–source:https://www.cbtnuggets.com/it-training/cisco/ccna
Free share of a portion of the Cisco Certified Network Associate 200-301 exam material (Including labs Q7):
QUESTION 1:
Refer to the exhibit.
Each router must be configured with the last usable IP address in the subnet. Which configuration fulfills this requirement?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: C
QUESTION 2:
Refer to the exhibit.
An engineer is asked to config router CB-R1 so that it forms an OSPF single-area neighbor relationship with CB-R2.
Which command sequence must be implemented to configure the router?
A. router ospf 10
network 10.0.0.0 0.0.0.3 area 0
network 10.0.2.0 0.0.0.255 area 0
B. router ospf 10
network 10.0.0.0 0.0.0.3 area 0
network 10.0.1.0 0.0.0.255 area 0
C. router ospf 10
network 10.0.0.0 0.0.0.3 area 0
network 10.0.2.0 255.255.255.0 area 0
D. router ospf 10
network 10.0.0.0 0.0.0.252 area 0
network 10.0.1.0 0.0.0.255 area 0
Correct Answer: B
QUESTION 3:
Refer to the exhibit.
How many JSON objects are represented?
A. 1
B. 2
C. 3
D. 4
Correct Answer: D
QUESTION 4:
Refer to the exhibit.
Which two configurations would be used to create and apply a standard access list on R1, so that only the 10.0.70.0/25 network devices are allowed to access the internal database server? (Choose two)
A. R1(config)# interface GigabitEthernet0/0
R1(config-if)# ip access-group 5 out
B. R1(config)# access-list 5 permit 10.0.54.0 0.0.1.255
C. R1(config)# interface Serial0/0/0
R1(config-if)# ip access-group 5 in
D. R1(config)# access-list 5 permit 10.0.70.0 0.0.0.127
E. R1(config)# access-list 5 permit any
Correct Answer: AD
QUESTION 5:
Refer to the exhibit. What is the next hop for traffic entering R1 with a destination of 10.1.2.126?
A. 10.165 20.126
B. 10.165.20.146
C. 10.165.20.166
D. 10.165 20.226
Correct Answer: D
QUESTION 6:
Refer to the exhibit. The given Windows PC is requesting the IP address of the host at www.cisco.com. To which IP address is the request sent?
A. 192.168.1.226
B. 192.168.1.100
C. 192.168.1.254
D. 192.168.1.253
Correct Answer: D
QUESTION 7*:
CCNA Lab simulation 6
All physical cabling between the two switches is installed. Configure the network connectivity between the switches using the designated VLANs and interfaces.
- Configure VLAN 100 named Compute and VLAN 200 named Telephony where required for each task.
- Configure Ethernet0/1 on SW2 to use the existing VLAN named Available.
- Configure the connection between the switches using access ports.
- Configure Ethernet0/1 on SW1 using data and voice VLANs.
- Configure Ethemet0/1 on SW2 so that the Cisco proprietary neighbor discovery protocol is turned off for the designated interface only.
See the Explanation below.
A. Check the Explanation below
B. Place Holder
C. Place Holder
D. Place Holder
Correct Answer: A
Answer as below configuration:
on sw1
enable
conf t
vlan 100
name Compute
vlan 200
name Telephony
int e0/1
switchport voice vlan 200
switchport access vlan 100
int e0/0
switchport mode access
do wr
on sw2
Vlan 99
Name Available
Int e0/1
Switchport access vlan 99
do wr
QUESTION 8:
Drag and Drop
Drag and drop the TCP or UDP details from the left onto their corresponding protocols on the right.
Select and Place:
Correct Answer:
QUESTION 9:
DRAG DROP
Drag and drop the TCP or UDP details from the left onto their corresponding protocols on the right.
Select and Place:
Correct Answer:
QUESTION 10:
Drag and Drop
Refer to Exhibit.
Rotor to the exhibit. The IP address configurations must be completed on the DC-1 and HQ-1 routers based on these requirements:
- DC-1 Gi1/0 must be the last usable address on a /30
- DC-1 Gi1/1 must be the first usable address on a /29
- DC-1 Gi1/2 must be the last usable address on a /28
- HQ-1 Gil/3 must be the last usable address on a /29
Drag and drop the commands from the left onto the destination interfaces on the right. Not all commands are used
Select and Place:
Correct Answer:
QUESTION 11:
DRAG DROP
Drag and drop the DNS lookup components from the left onto the functions on the right.
Select and Place:
Correct Answer:
QUESTION 12:
Drag and Drop
An interface has been configured with the access list that is shown below.
On the basis of that access list, drag each information packet on the left to the appropriate category on the right.
Select and Place:
Correct Answer:
QUESTION 13:
Drag and Drop
Drag and drop the Cisco Wireless LAN Controller security settings from the left onto the correct security mechanism categories on the right.
Select and Place:
Correct Answer:
Layer 2 Security Mechanism includes WPA+WPA2, 802.1X, Static WEP, CKIP while Layer 3 Security Mechanisms (for WLAN) includes IPSec, VPN Pass-Through, Web Passthrough …
QUESTION 14:
Refer to the exhibit.
CertBus-R1# show ip route
What is the next hop for traffic entering CertBus-R1 with a destination of 10.1.2 126?
A. 10.165 20.126
B. 10.165.20.146
C. 10.165.20.166
D. 10.165 20.226
Correct Answer: D
QUESTION 15:
An engineer has configured the domain name, user name, and password on the local router. What is the next step to complete the configuration tor a Secure Shell access RSA key?
A. crypto key Import rsa pem
B. crypto key pubkey-chain rsa
C. crypto key generate rsa
D. crypto key zeroize rsa
Correct Answer: C
……
[Free Download]Cisco Certified Network Associate 200-301 exam material (Including labs):https://drive.google.com/file/d/1bEpMJLRNFn4w7PqhOXcF23dWnrUoLX35/
The above are free to share 15 200-301 CCNA exam material, click here to get more exam questions and answers.