adminMicrosoft 70-417 exam pdf Windows Server 2012 is the industry leader in information technology, and getting certified by them is a guaranteed way to succeed with IT careers. https://www.leads4pass.com/70-417.html We help you do exactly that with our high quality Microsoft Windows Server 2012 Upgrading Your Skills to MCSA Windows Server 2012 training materials.
QUESTION 1
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
You install a network monitoring application on VM2.
You need to ensure that all of the 70-417 traffic sent to VM3 can be captured on VM2.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Correct Answer: J
Explanation:
With Hyper-V Virtual Switch port mirroring, you can select the switch ports that are monitored as well as the switch port that receives copies of all the traffic. And since Port mirroring allows the network traffic of a virtual machine to 70-417 vce be monitored by copying the traffic and forwarding it to another virtual machine that is configured for monitoring, you should configure port mirroring on VM2.
QUESTION 2
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
You plan to schedule a complete backup of Server1 by using Windows Server Backup.
You need to ensure that the 70-417 dumps state of VM1 is saved before the backup starts.
What should you configure?
A. NUMA topology
B. Resource control
C. Resource metering
D. Virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Correct Answer: I
Explanation:
The Integration Services settings on virtual machines include services such as operating system shutdown, time synchronization, data exchange, Heartbeat, and Backup (volume snapshot services). This snapshot will ensure that the state of VM1 is saved prior to backup.
QUESTION 3
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs 70-417 exam Windows Server 2012 R2 and has the Hyper-V server role installed.
On Server1, you create and start a virtual machine named VM1. VM1 is configured as shown in the following table.
You plan to create a checkpoint of VM1.
You need to recommend a solution to minimize the amount of disk space used for the checkpoint of VM1.
What should you do before you create the checkpoint?
A. Decrease the Maximum RAM.
B. Convert Disk1.vhd to a dynamically expanding disk.
C. Run the Stop-VM cmdlet.
D. Run the Resize-VHD cmdlet.
Correct Answer: C
Explanation:
For checkpoints created when the virtual machine is stopped The checkpoint contains the state of the hard disks only. For checkpoints created when the virtual machine is running The checkpoint contains the state of the 70-417 pdf hard disks and the data in memory. Note: A checkpoint saves the state of each virtual hard disk that is attached to a virtual machine and all of the hard disk’s contents, including application data files. For virtual machines on Hyper-V and VMware ESX Server hosts, a checkpoint also saves the hardware configuration information. By creating checkpoints for a virtual machine, you can restore the virtual machine to a previous state.
QUESTION 4
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012.
You create a group Managed Service Account named gservice1.
You need to configure a service named Service1 to run as the gservice1 account.
How should you configure Service1?
A. From a command prompt, run ss.exe and specify the config parameter.
B. From a command prompt, run ss.exe and specify the sdset parameter.
C. From the Services console, configure the General settings.
D. From Windows PowerShell, run Set-Service and specify the -PassThrough parameter.
Correct Answer: C
Explanation:
* Services are often run with default settings — for example, a service might be disabled automatically at startup. You can use the Services snap-in to change the default settings for a service.
* To configure how a service is started using the Windows interface
1. ClickStart , click in theStart Search box, typeservices.msc , and then press ENTER.
2. Optionally, export and save a list of the 70-417 existing settings. To do this, right-clickServices , selectExport List , and save the settings list.
3. In the details pane, right-click the service that you want to configure, and then clickProperties .
4. On theGeneral tab, inStartup type , clickAutomatic ,Manual ,Disabled , orAutomatic (Delayed Start) .
5. To specify the user account that the service can use to log on, click theLog On tab.
Read more: https://www.leads4pass.com/70-417.html The Miscrosoft 70-417 practice questions and answers covers all the knowledge points of the real exam. We update our product frequently so our customer can always have the latest version of the brain dumps. We have the most professional expert team to back up our grate quality products. If you still cannot make your decision on purchasing our product, please try our free demo.
Reference: https://www.microsoft.com/en-us/learning/exam-70-417.aspx
Download free Microsoft 70-417 exam pdf study materials: https://drive.google.com/open?id=0B7LFs7RuvDV4bWZ4ZVNyRDVwYlU
Watch the video to learn more: